для Cisco Cisco IOS Software Release 12.0(13)S7
Unicast Reverse Path Forwarding for IPv6 on the Cisco 12000 Series Internet Router
Additional References
10
Cisco IOS Release 12.0(31)S
ee48sb: uidb valid
rx_uidb_index=12, tx_uidb_index=12
if_number=6, bulk_sync_flag=0x0
Subinterface Counters Subblock active
Additional References
The following sections provide references related to the Unicast RPF for IPv6 feature.
Related Documents
Standards
Related Topic
Document Title
Configuring Unicast RPF
“
Configuring Unicast Reverse Path Forwarding”
chapter in the
Cisco IOS Security Configuration Guide, Release 12.3
Information about Cisco Express Forwarding on the
Cisco 12000 series Internet Router
Cisco 12000 series Internet Router
“
Cisco Express Forwarding
” chapter in the
Cisco IOS Switching Configuration Guide, Release 12.0
Unicast RPF configuration command for IPv4:
complete command syntax, command mode, defaults,
usage guidelines and examples
complete command syntax, command mode, defaults,
usage guidelines and examples
ip verify unicast reverse-path command reference page in the
Release 12.3
IPv6
Cisco IOS IPv6 Configuration Library
IPv6 commands: complete command syntax, command
mode, defaults, usage guidelines and examples.
mode, defaults, usage guidelines and examples.
” chapter in the
Cisco IOS IPv6 Command Reference
Configuration and troubleshooting procedures for the
SPA interface processors (SIPs) and shared port
adapters (SPAs) supported on a Cisco 12000 series
Internet router.
SPA interface processors (SIPs) and shared port
adapters (SPAs) supported on a Cisco 12000 series
Internet router.
Standards
Title
No new or modified standards are supported by this
feature.
feature.
—