для Cisco Cisco IOS Software Release 12.0(13)S7
![Cisco](https://files.manualsbrain.com/attachments/7380d0050044647c30f5c24bbbf5d0c0b6d9bb84/common/fit/150/50/faa183d287233c52228cfea3dbc2a127fe780f60564fcb0955d9c3d1cd23/brand_logo.png)
Unicast Reverse Path Forwarding for IPv6 on the Cisco 12000 Series Internet Router
Configuration Examples for Unicast RPF for IPv6
9
Cisco IOS Release 12.0(31)S
Configuration Examples for Unicast RPF for IPv6
This section contains the following configuration examples for Unicast RPF for IPv6:
•
•
Configuring Unicast RPF for IPv6 with Strict Checking—Examples
The following example shows how to configure the Unicast RPF for IPv6 feature in strict checking mode
on an input 10G SIP Gigabit Ethernet interface in a Cisco 12000 series Internet router:
on an input 10G SIP Gigabit Ethernet interface in a Cisco 12000 series Internet router:
Router# configure terminal
Router(config)# interface gigabitethernet 3/1/1
Router(config-if)# ipv6 verify unicast source reachable-via rx
The next example also shows how to configure the Unicast RPF for IPv6 feature in strict checking mode
on the same input interface in a Cisco 12000 series Internet router using the ipv6 verify unicast
reverse-path command:
on the same input interface in a Cisco 12000 series Internet router using the ipv6 verify unicast
reverse-path command:
Router# configure terminal
Router(config)# interface gigabitethernet 3/1/1
Router(config-if)# ipv6 verify unicast reverse-path
Verifying Unicast RPF for IPv6—Example
To verify that Unicast RPF for IPv6 is operational, use the show cef interface type slot/subslot/port
internal command in privileged EXEC mode.
internal command in privileged EXEC mode.
As shown in the following example, Unicast RPF for IPv6 is enabled if the line starting with IPv6 unicast
RPF appears. If this line is not displayed, the Unicast RPF feature is not enabled. The numbers following
drop= and sdrop= show the number of IPv6 packets dropped by Unicast RPF.
RPF appears. If this line is not displayed, the Unicast RPF feature is not enabled. The numbers following
drop= and sdrop= show the number of IPv6 packets dropped by Unicast RPF.
Router# show cef interface pos 2/0/1 internal
POS2/1 is up (if_number 6)
Corresponding hwidb fast_if_number 6
Corresponding hwidb firstsw->if_number 6
Internet Protocol processing disabled
Interface is marked as point to point interface
Interface generates an auto-adjacency
Hardware idb is POS2/0/1 (6)
Software idb is POS2/0/1 (6)
Fast switching type 4, interface type 11
IP Distributed CEF switching enabled
IP Null turbo vector
Input fast flags 0x0, Output fast flags 0x0, Flags 0x80041
ifindex 5(5)
Slot 2 Slot unit 1 VC -1
Transmit limit accumulator 0x0 (0x0)
IP MTU 4470
Subblocks:
IPv6 unicast RPF: acl=None, drop=0, sdrop=0
IPv6: enabled 1 unreachable FALSE redirect TRUE mtu 4470 flags 0x0
link-local address is FE80::204:6DFF:FE9A:CFFF
Global unicast address(es):
BBBB::1, subnet is BBBB::/64
Input features: RPF