Руководство По Установке для Cisco Cisco Content Security Management Appliance M160
6
For Mac
The exact steps depend on your operating system version.
Step 1
Launch the Apple menu and choose System Preferences.
Step 2
Click Network.
Step 3
Click the lock icon to allow changes.
Step 4
Select the network configuration with the green icon.
This is your active connection. Then click Advanced.
This is your active connection. Then click Advanced.
Step 5
Click the TCP/IP tab and from Ethernet settings,
choose Manually from the drop-down list.
choose Manually from the drop-down list.
Step 6
Enter the following changes:
•
IP Address: 192.168.42.43
•
Subnet Mask: 255.255.255.0
•
Router: 192.168.42.1
Step 7
Click OK.
7
Connect to the Appliance
The Cisco M190 appliance has two gigabit network ports:
Data 1 and Data 2.
For the purposes of setup, connect to Data 1 as your
management interface and configure incoming web traffic or
email on the Data 2 interface. These settings can be changed
after the initial installation.
management interface and configure incoming web traffic or
email on the Data 2 interface. These settings can be changed
after the initial installation.
M190_QSG.fm Page 6 Thursday, March 31, 2016 4:32 PM