Руководство По Установке для Cisco Cisco Content Security Management Appliance M160
8
9
Log In to the Appliance
You can log into the Cisco M190 using the web-based interface
or the command line interface.
or the command line interface.
Web-Based Interface
Step 1
For web browser access via the Ethernet port (see the
), log in to
the Cisco M190 appliance by entering the following
URL in a web browser:
URL in a web browser:
http://192.168.42.42
Step 2
Enter the following login information:
•
Username: admin
•
Password: ironport
Note
The hostname parameter is assigned during system
setup. Before you can connect to the web interface
using a hostname (http://hostname), you must add the
appliance hostname and IP address to your DNS server.
setup. Before you can connect to the web interface
using a hostname (http://hostname), you must add the
appliance hostname and IP address to your DNS server.
Step 3
Click Login.
Command-Line Interface
Step 1
Access the command-line interface locally or remotely:
•
To access the CLI locally, set up a terminal to
connect to the serial port using 9600 bits, 8 bits, no
parity, 1 stop bit (9600, 8, N, 1) and flow control
set to Hardware. To physically connect the
terminal, see the
connect to the serial port using 9600 bits, 8 bits, no
parity, 1 stop bit (9600, 8, N, 1) and flow control
set to Hardware. To physically connect the
terminal, see the
•
To access the CLI remotely, initiate an SSH session
to the IP address 192.168.42.42.
to the IP address 192.168.42.42.
M190_QSG.fm Page 8 Thursday, March 31, 2016 4:32 PM