для Cisco Cisco IOS Software Releases 12.2 B

Скачать
Страница из 18
   
      ISDN PRI-SLT
How to Configure ISDN PRI-SLT
4
Cisco IOS Release 12.2(8)B and Cisco IOS Release 12.2(15)T
The D-Channel Interface and Cisco SS7 Interconnect for Voice Gateways
A new interface, D-channel, is introduced with the ISDN PRI-SLT feature for use specifically in VoIP 
applications, such as an SS7 Interconnect Voice Gateway that requires release of ISDN signaling time 
slots for RLM configurations.
A Cisco SLT is a key component of the Cisco SS7 Interconnect for Voice Gateways feature. In the 
Cisco SS7 Interconnect for Voice Gateways environment, the D channel will be on Ethernet, and the time 
slots on an E1 and T1 controller can be shared by other applications such as SS7.
How to Configure ISDN PRI-SLT
This section contains the following tasks. Each task is identified as either required or optional.
 (optional)
Release the PRI Signaling Time Slot
To release the ISDN PRI signaling time slot for environments that require SS7-enabled VoIP applications 
to share all available time slots in a PRI group, use the following commands:
SUMMARY STEPS
1.
enable
2.
configure {terminal | memory | network}
3.
controller {t1 | e1} controller-number
4.
pri-group timeslots timeslot-range [nfas_d {backup | none | primary {nfas_int number 
nfas_group number rlm-group number}} | service]
5.
channel-group channel-number timeslots range [speed {48 | 56 | 64}]
6.
exit
7.
interface Dchannel interface-number
8.
isdn command parameter (use the commands listed in 
Table 1 on page 4
 to configure the ISDN 
interface)
9.
exit
isdn max-restart-tries
isdn t307
isdn n200
isdn t309
isdn negotiate-bchan
isdn t309-enable
isdn network-failure-cause 
isdn t310
isdn not-end-to-end
isdn t321