Примечания к выпуску для Cisco Cisco IOS Software Release 12.2(4)YH

Due to a timing issue, even when an interface is up, the DHCP process is not activated and DHCP 
functionality is disabled on that interface. To work around this problem, again enter the command 
no shut on the WAN (Ethernet1) interface.

The nat translation functionality does not work for IPSec traffic on a 806uut.

Valid RTT probes can not be determined from querying the MIB object 
rttMonApplSupportedRttTypesValid.

The router returns a value of 0 instead of the default value of 1 for the TCP MIB object 
rttMonEchoAdminPktDataRequestSize. 

The following sections describe the documentation available for the SOHO 70 and Cisco 800 series 
routers. Typically, these documents consist of hardware and software installation guides, Cisco IOS 
configuration and command references, system error messages, feature modules, and other documents.

Documentation is available as printed manuals or electronic documents, except for feature modules and 
the Cisco IOS release notes, which are available online on Cisco.com and the Documentation CD-ROM.

Use these release notes with the documents listed in the following sections:

The following documents are specific to Release 12.2 and apply to Release 12.2(4)YH. They are located 
on Cisco.com and the Documentation CD-ROM (under the heading Service & Support):

To reach the 

, click 

this path:

:

:

 Release 12.2

:

 Release Notes

:

 Cisco 800 Series  

:

 Cisco 800 Series - Release Notes for Release 12.2(4)YH

To reach the 

Cross-Platform Release Notes for Cisco IOS Release 12.2 T

, click this path:

:

:

 Release 12.2

:

 Release Notes

: 

Cisco IOS  

To reach product bulletins, field notices, and other release-specific documents, click this path:

:

 Product Bulletins