для Cisco Cisco IOS Software Release 12.2(33)SRE
VPLS Autodiscovery: BGP Based
How to Configure VPLS Autodiscovery: BGP Based
5
Cisco IOS Release 12.2(33)SRA
How to Configure VPLS Autodiscovery: BGP Based
To configure VPLS Autodiscovery, perform the following tasks:
•
(required)
•
(required)
•
(optional)
Enabling VPLS Autodiscovery: BGP Based
Perform the following task to enable each VPLS PE router to discover the other PE routers that are part
of the same VPLS domain.
of the same VPLS domain.
Prerequisites
Before configuring VPLS Autodiscovery, perform the Cisco 7600 router-specific tasks listed in the “
“
“
section in the Cisco 7600 Series Router
IOS Software Configuration Guide, 12.2SR.
SUMMARY STEPS
1.
enable
2.
configure terminal
3.
l2 vfi vfi-name autodiscovery
4.
vpn id vpn-id
5.
exit