для Cisco Cisco IOS Software Release 12.2(27)SBC

Before you enable the ISG device to receive ASCII command codes, you should understand the 
following concepts:

ISG supports Layer 2 and Layer 3 service selection and provides selective routing of IP packets to 
destination networks on a per-subscriber basis. ISG has an interface with web dashboard (SESM), which 
enables users to select the services they are interested in, or push the policies for the session. RADIUS 
protocol is used for communication between ISG and SESM. The RADIUS packet sent by SESM to ISG 
has defined command codes.

Configuration information is included in the Cisco IOS ISG RADIUS Interface Guide, Release 12.2SB,

at the following URL:

The following sections provide references related to CoA ASCII Command Code Support.

ISG commands 

ISG design and deployment

 

Release 12.2SB