для Cisco Cisco IOS Software Release 12.2(27)SBC
MPLS EM—MPLS LSP Multipath Tree Trace
Feature Information for MPLS EM—MPLS LSP Multipath Tree Trace
50
Book Title
Feature Information for MPLS EM—MPLS LSP Multipath Tree
Trace
Trace
lists the release history for this feature.
Not all commands may be available in your Cisco IOS software release. For release information about a
specific command, see the command reference documentation.
specific command, see the command reference documentation.
http://www.cisco.com/go/cfn
. An account on Cisco.com is
not required.
Note
lists only the Cisco IOS software release that introduced support for a given feature in a given
Cisco IOS software release. Unless noted otherwise, subsequent releases of that Cisco IOS software
release also support that feature.
release also support that feature.
Table 5
Feature Information for MPLS EM—MPLS LSP Multipath Tree Trace
Feature Name
Releases
Feature Information
MPLS EM—MPLS LSP Multipath Tree
Trace
Trace
12.2(31)SB2
12.2(33)SRB
12.2(33)SRB
The MPLS EM—MPLS LSP Multipath Tree Trace feature
provides the means to discover all the possible paths of a
label switched path (LSP) between an egress and ingress
router. Once discovered, these paths can be retested on a
periodic basis using Multiprotocol Label Switching
(MPLS) LSP ping or traceroute. This feature is an extension
to the MPLS LSP traceroute functionality for the tracing of
IPv4 LSPs.
provides the means to discover all the possible paths of a
label switched path (LSP) between an egress and ingress
router. Once discovered, these paths can be retested on a
periodic basis using Multiprotocol Label Switching
(MPLS) LSP ping or traceroute. This feature is an extension
to the MPLS LSP traceroute functionality for the tracing of
IPv4 LSPs.
Cisco IOS MPLS Embedded Management (EM) is a set of
standards and value-added services that facilitate the
deployment, operation, administration, and management of
MPLS-based networks in line with the fault, configuration,
accounting, performance, and security (FCAPS) model.
standards and value-added services that facilitate the
deployment, operation, administration, and management of
MPLS-based networks in line with the fault, configuration,
accounting, performance, and security (FCAPS) model.
In Cisco IOS Release 12.2(31)SB2, this feature was
introduced.
introduced.
In Cisco IOS Release 12.2(33)SRB, support was added for
a Cisco IOS 12.2SR release.
a Cisco IOS 12.2SR release.
The following sections provide information about this
feature:
feature:
•
•
•
•