Примечания к выпуску для Cisco Cisco 2106 Wireless LAN Controller
3
Release Notes for Cisco Wireless LAN Controllers and Lightweight Access Points for Release 6.0.202.0
OL-31336-01
Controller Requirements
•
Cisco Aironet 1100, 1130, 1140, 1200, 1230AG, 1240, 1250, 1300, and AP801 Series Lightweight
Access Points
Access Points
•
Cisco 3310 mobility Service Engine
Note
Controller software release 5.0.148.0 or later releases is not compatible with Cisco Aironet
1000 series access points.
1000 series access points.
Note
The AP801 is an integrated access point on the Cisco 800 Series Integrated Services Routers
(ISRs).
(ISRs).
Note
The integrated controller in Cisco 2800 series routers is not supported in the 6.0.200.1
release. Do not install these releases on the integrated controller in 2800 series routers. The
is upgrade from 6.0 to 7.0 is not supported.
release. Do not install these releases on the integrated controller in 2800 series routers. The
is upgrade from 6.0 to 7.0 is not supported.
Note
Only Cisco Aironet 1200 Series Access Points that contain 802.11g (AIR-MP21G) or
second-generation 802.11a radios (AIR-RM21A or AIR-RM22A) are supported for use with
controller software releases. The AIR-RM20A radio, which was included in early 1200
series access point models, is not supported. To see the type of radio module installed in your
access point, enter this command on the access point: show controller dot11radio n, where
n is the number of the radio (0 or 1).
second-generation 802.11a radios (AIR-RM21A or AIR-RM22A) are supported for use with
controller software releases. The AIR-RM20A radio, which was included in early 1200
series access point models, is not supported. To see the type of radio module installed in your
access point, enter this command on the access point: show controller dot11radio n, where
n is the number of the radio (0 or 1).
Note
For 5500 Series controller, the Dot1p value in the capwap packet between controller and the
AP is always 0 irrespective of the profile configured on the WLAN and the DSCP value.
AP is always 0 irrespective of the profile configured on the WLAN and the DSCP value.
Controller Requirements
The controller GUI requires the following operating system and web browser:
•
Windows XP SP1 (or later) or Windows 2000 SP4 (or later)
•
Internet Explorer 6.0 SP1 (or later) or Mozilla Firefox 2.0.0.11 (or later)
Note
Internet Explorer 6.0 SP1 (or later) and Mozilla Firefox 2.0.0.11 (or later) are the only
browsers supported for using the controller GUI and web authentication.
browsers supported for using the controller GUI and web authentication.
MIB Files
Cisco controllers support standard SNMP Management Information Base (MIB) files. MIBs can be
downloaded from the Software Center on Cisco.com. Only one MIB is posted per major release (6.0, 5.2,
5.1, and so on). If an updated MIB becomes available, the previous version is removed from the Software
Center and replaced by the new version.
downloaded from the Software Center on Cisco.com. Only one MIB is posted per major release (6.0, 5.2,
5.1, and so on). If an updated MIB becomes available, the previous version is removed from the Software
Center and replaced by the new version.