Примечания к выпуску для Cisco Cisco 2106 Wireless LAN Controller

        Priority 2............................... Disabled

        Priority 3............................... Disabled

        Priority 4............................... Enabled

        Priority 5............................... Enabled

        Priority 6............................... Disabled

        Priority 7............................... Disabled

    A-MSDU Tx:

        Priority 0............................... Enabled

        Priority 1............................... Enabled

        Priority 2............................... Enabled

        Priority 3............................... Enabled

        Priority 4............................... Enabled

        Priority 5............................... Enabled

        Priority 6............................... Disabled

        Priority 7............................... Disabled

    Rifs Rx ..................................... Enabled

    Guard Interval .............................. Any

Beacon Interval.................................. 100

International regulatory requirements are constantly changing. To stay up-to-date on these changes, the 
following regulatory domain updates are included in the Cisco Unified Wireless Network Software 
release 6.0.200.201.

Addition of the -R regulatory domain to support the new 802.11a(except52) and 802.11b/g channel and 
power setting for Russia. The following combinations of access points are permitted:

1130, 1240, 1250, 1140, 1520

AIR-AP1131AG-R-K9, AIR-LAP1131AG-R-K9, AIR-AP1242AG-R-K9, 
AIR-LAP1242AG-R-K9, AIR-AP1252AG-R-K9, AIR-LAP1252AG-R-K9, AIR-AP1142N-R-K9, 
AIR-LAP1142N-R-K9, AIR-AP1262N-R-K9, AIR-LAP1262N-R-K9,AIR-CAP3502I-R-K9, 
AIR-CAP3502E-R-K9, AIR-LAP1522AG-R-K9, AIR-LAP1522HZ-R-K9, 
AIR-LAP1524SB-R-K9

Software is factory installed on your controller and automatically downloaded to the access points after 
a release upgrade and whenever an access point joins a controller. As new releases become available for 
the controllers and their access points, consider upgrading.

The Cisco WiSM requires software release SWISMK9-32 or later releases. The Supervisor 720 
12.2(18)SXF2 supports the Cisco WiSM software release 3.2.78.4 or later releases, and the Supervisor 
720 12.2(18)SXF5 (Cisco IOS Software Modularity) supports the Cisco WiSM software release 
4.0.155.5 (with Cisco IOS Software Modularity).

To use the Cisco WiSM in the Cisco 7609 and 7613 Series Routers, the routers must be running Cisco 
IOS Release 12.2(18)SXF5 or later releases.