Технические ссылки для Cisco Cisco 4100 Series Wireless LAN Controller
5/26/05
config rogue ap
OL-7427-02
config rogue ap
config rogue ap
To configure the status of a rogue access point, use the config rogue ap command.
>config rogue ap <acknowledged/alert/contain/known> <MAC address> <num of
APs>
Syntax
config
Configure parameters.
rogue ap
Rogue access point status.
acknowledged
This rogue access point has been identified and
belongs to an external network.
belongs to an external network.
alert
This rogue access point has not been identified.
Generates a trap upon detection of this access point.
Generates a trap upon detection of this access point.
contain
Start containing a rogue access point.
known
This rogue access point has been identified and is
part of an internal network.
part of an internal network.
<MAC address>
MAC address of the rogue access point.
<num of APs>
Number of rogue access points.
Defaults
(none)
Example
>config rogue ap acknowledge 11:11:11:11:11:11
Related Commands
•
show rogue ap summary, show rogue ap detailed