Технические ссылки для Cisco Cisco 4100 Series Wireless LAN Controller
5/26/05
config 802.11a antenna
OL-7427-02
config 802.11a antenna
config 802.11a antenna
To configure the 802.11a antenna, use the config 802.11a antenna command.
Use the config 802.11a disable command to disable the 802.11a Cisco Radio before using the config
802.11a antenna command. Then use the config 802.11a antenna command to configure the Cisco
1000 Series lightweight access point to use internal or external antennas. Then use the config 802.11a
enable command to enable the 802.11a Cisco Radio.
Use the config 802.11a disable command to disable the 802.11a Cisco Radio before using the config
802.11a antenna command. Then use the config 802.11a antenna command to configure the Cisco
1000 Series lightweight access point to use internal or external antennas. Then use the config 802.11a
enable command to enable the 802.11a Cisco Radio.
>
config 802.11a antenna <Cisco AP> <internal/external>
Syntax
config
Configure parameters.
802.11a antenna
Antennas for 802.11a Cisco Radio.
<Cisco AP>
Cisco 1000 Series lightweight access point name.
<internal/external>
Configure for internal or external antennas.
Defaults
Internal.
Examples
>config 802.11a antenna AP1 internal
to set AP1 to use the 802.11a internal antennas.
to set AP1 to use the 802.11a internal antennas.
Related Commands
config 802.11a disable, config 802.11a enable, config 802.11a antMode