Технические ссылки для Cisco Cisco 4100 Series Wireless LAN Controller

config 802.11b 11gSupport

After enabling the Cisco WLAN Solution 802.11b network using the config 802.11b enable command, 
enable or disable the Cisco WLAN Solution 802.11g network using the config 802.11b 11gSupport 
command. Note that you must use this command to enable the network after configuring other 
802.11b parameters.
Note that this command only enables the Cisco WLAN Solution 802.11g network after the Cisco WLAN 
Solution 802.11b network is enabled using the config 802.11b enable command. To disable the 
802.11a, 802.11b and/or 802.11g networks for an individual WLAN, use the config wlan radio 
command.
This command can be used any time the CLI interface is active.

>

config

Configure parameters.

802.11b

802.11b network parameters.

11gSupport

Support for the 802.11g network.

enable/disable

Enable or disable 802.11b/g.

<Cisco AP>

To override the network setting for individual Cisco 
1000 Series lightweight access point Cisco Radio.

Enabled.

>config 802.11b 11gSupport enable

Changing the 11gSupport will cause all the APs to reboot when you enable 

802.11b network.

Are you sure you want to continue? (y/n) 

11gSupport not changed!

show sysinfo, show 802.11b, config 802.11b enable, config wlan radio, config 
802.11b disable, config 802.11a disable, config 802.11a enable