Технические ссылки для Cisco Cisco 4100 Series Wireless LAN Controller
5/26/05
config 802.11b beaconperiod
OL-7427-02
config 802.11b beaconperiod
config 802.11b beaconperiod
In Cisco WLAN Solution 802.11b/g networks, all Cisco 1000 Series lightweight access point WLANs
broadcast a beacon at regular intervals. This beacon notifies clients that 802.11b/g service is available,
and allows the clients to synchronize with the Cisco 1000 Series lightweight access point. To change the
802.11b/g beacon period for the whole 802.11b/g network, use the config 802.11b beaconperiod
command.
Before you change the beacon period using the config 802.11b beaconperiod command, make sure that
you have disabled the 802.11b/g network using the config 802.11b disable command. When you are
done changing the beacon period, remember to enable the 802.11b/g network using the config
802.11b enable command.
broadcast a beacon at regular intervals. This beacon notifies clients that 802.11b/g service is available,
and allows the clients to synchronize with the Cisco 1000 Series lightweight access point. To change the
802.11b/g beacon period for the whole 802.11b/g network, use the config 802.11b beaconperiod
command.
Before you change the beacon period using the config 802.11b beaconperiod command, make sure that
you have disabled the 802.11b/g network using the config 802.11b disable command. When you are
done changing the beacon period, remember to enable the 802.11b/g network using the config
802.11b enable command.
>
config 802.11b beaconperiod <Time Units>
Syntax
config
Configure parameters.
802.11b
802.11b/g network parameters.
beaconperiod
Send a beacon every 100 to 600 milliseconds.
<time units>
Beacon interval in milliseconds.
Defaults
100 milliseconds.
Examples
To configure an 802.11b/g network for a beacon period of 180 milliseconds.
>config 802.11b beaconperiod 180
>config 802.11b beaconperiod 180
Related Commands
show 802.11a, config 802.11a beaconperiod, config 802.11b disable, config
802.11b enable
802.11b enable