Технические ссылки для Cisco Cisco 4100 Series Wireless LAN Controller

 

show client detail

To display detailed information for a client on an Cisco 1000 Series lightweight access point, use the 
show client detail command.

>

show

Display configurations.

client

802.11a or 802.11b/g client.

detail

Connectivity information.

<MAC address>

MAC address of the specific client.

(none)

>show client detail 00:0c:41:07:33:a6

Client MAC Address............................... 00:0c:41:07:33:a6

Client Username.................................. N/A

AP MAC Address................................... 00:0b:85:01:18:b0

Client State..................................... Associated

Wireless LAN Id.................................. 1

IP Address....................................... Unknown

Association Id................................... 1

Authentication Algorithm......................... Shared Key

Reason Code...................................... 0

Status Code...................................... 0

Session Timeout.................................. 0

Mirroring........................................ Disabled

QoS Level........................................ Gold

Diff Serv Code Point (DSPC)...................... disabled

802.1P Priority Tag.............................. disabled

Mobility State................................... Local

Mobility Move Count.............................. 0

Security Policy Completed........................ No

Policy Manager State............................. DHCP_REQD

Policy Manager Rule Created...................... No

NPU Fast Notified................................ Yes

Policy Type...................................... N/A

Encryption Cipher................................ WEP (104 bits)

EAP Type......................................... Unknown

Interface........................................ management

VLAN............................................. 0

Client Capabilities:

      CF Pollable................................ Not implemented

      CF Poll Request............................ Not implemented

      Short Preamble............................. Not implemented

      PBCC....................................... Not implemented

      Channel Agility............................ Not implemented

      Listen Interval............................ 0

Client Statistics:

      Number of Bytes Received................... 0

      Number of Bytes Sent....................... 0

      Number of Packets Received................. 0

      Number of Packets Sent..................... 0

      Number of Policy Errors.................... 0

      Radio Signal Strength Indicator............ Unavailable

      Signal to Noise Ratio...................... Unavailable

 The show client ap command may list the status of automatically disabled 

clients. Use the show blacklist command to view clients on the Exclusion List 
(blacklisted).