Технические ссылки для Cisco Cisco 4100 Series Wireless LAN Controller
3/22/05
show client summary
OL-7427-01 Rev 1
Nearby AP Statistics:
AP03(slot 0) 24643 seconds ago............. -11 dBm
Related Commands
show client ap, show client summary, show client username, show blacklist
show client summary
show client summary
To display a summary of clients associated with an Cisco 1000 Series lightweight access point, use the
show client summary command.
show client summary command.
>
show client summary
Syntax
show
Display configurations.
client
802.11a or 802.11b/g client.
summary
All attached clients.
Defaults
(none)
Examples
>show client summary
MAC Address AP Name Status WLAN Auth Protocol Port
----------------- ----------------- ------------- ---- ---- -------- ----
00:0c:41:0a:33:13 AP01 Associated 1 No 802.11g 5
Related Commands
show client ap, show client detail, show client username, show blacklist
show client username
show client username
To display client data by username, use the show client username command.
>
show client username <Username>
Syntax
show
Display configurations.
username
Cisco Radio.
<Username>
Client Username.
Defaults
(none)
Examples
>show client username IT_007
MAC Address AP ID Status WLAN Id Authenticated
----------------- ------ ------------- --------- -------------
00:0c:41:0a:33:13 1 Associated 1 No
Related Commands
show client ap, show client detail, show client summary
show country
show country
The Cisco Wireless LAN Controller must be configured to comply with the target country's permitted
802.11a and/or 802.11b frequency bands. To display a list of supported countries and their permitted
frequency bands, use the show country command. This command also shows you the current country
setting for the Cisco Wireless LAN Controller.
802.11a and/or 802.11b frequency bands. To display a list of supported countries and their permitted
frequency bands, use the show country command. This command also shows you the current country
setting for the Cisco Wireless LAN Controller.
>
show country
Syntax
show
Display configuration options.
country
Supported Countries.
Note:
The show client ap command may list the status of automatically disabled
clients. Use the show blacklist command to view clients on the Exclusion List
(blacklisted).
(blacklisted).