Технические ссылки для Cisco Cisco 4100 Series Wireless LAN Controller

 

Global, Auto.

To have Radio Resource Management (RRM) automatically set the transmit 
power for all 802.11b/g Cisco Radios at periodic intervals:
>config 802.11a txPower global auto

To have Radio Resource Management (RRM) automatically reset the transmit 
power for all 802.11b/g Cisco Radios one time:
>config 802.11b txPower global once

To set transmit power for all 802.11b/g Cisco Radios to power level 5 (lowest):
>config 802.11b txPower global 5

To set transmit power for 802.11b/g AP1 to global:
>config 802.11b txPower AP1 global

To set transmit power for 802.11b/g AP1 to power level 2:
>config 802.11b txPower AP1 2

show ap config 802.11b, config 802.11a txPower, config country

config aepi

To configure External Policy Servers, use the config aepi command. 

>

config aepi

Command action.

acl

Configures the AEPI ACL Name.

add <index> <IP addr> <port> <secret>

Configures the External Policy Server.

delete <index>

Deletes the External Policy Server.

disable <index>

Disables the External Policy Server.

enable <index>

Enables the External Policy Server.

N/A

>config aepi enable acl01

show aepi

config acl

To configure Access Control Lists, use the config acl command. 

>

 The Cisco 1000 Series lightweight access point 802.11b Cisco Radio supports 

five transmit power levels: 1 = Maximum transmit power level allowed per Country 
Code setting, 2 = 50% power, 3 = 25% power, 4 = 6.25 to 12.5% power, and 
5 = 0.195 to 6.25% power.
Refer to Cisco SWAN Supported Country Codes in the Product Guide for the 
maximum regulatory Transmit Power Level Limits published for each Country Code. 
Note that the power levels and available channels are defined by the Country Code 
setting, and are regulated on a country by country basis. Also note that the actual 
maximum transmit power levels may be less than the published regulatory limits.