Технические ссылки для Cisco Cisco 5760 Wireless LAN Controller
wireless wps ap-authentication
To configure the access point neighbor authentication, use the wireless wps ap-authentication command.
To remove the access point neighbor authentication, use the no form of the command.
To remove the access point neighbor authentication, use the no form of the command.
wireless wps ap-authentication [threshold value]
no wireless wps ap-authentication [threshold]
Syntax Description
Specifies that the WMM-enabled clients are on the wireless LAN. Threshold
value (1 to 255).
value (1 to 255).
threshold value
Command Default
None.
Command Modes
config
Command History
Modification
Release
This command was introduced.
Cisco IOS XE 3.2SE
Usage Guidelines
None.
Examples
This example shows how to set the threshold value for WMM-enabled clients.
Controller#
configure terminal
Enter configuration commands, one per line.
End with CNTL/Z.
Controller(config)#
wireless wps ap-authentication threshold 65
Consolidated Platform Command Reference, Cisco IOS XE Release 3SE (Cisco WLC 5700 Series)
448
OL-29471-01
wireless wps ap-authentication