Технические ссылки для Cisco Cisco 5760 Wireless LAN Controller
wireless wps cids-sensor
To configure Intrusion Detection System (IDS) sensors for the Wireless Protection System (WPS), use the
wireless wps cids-sensor command. To remove the Intrusion Detection System (IDS) sensors for the Wireless
Protection System (WPS), use the no form of the command.
wireless wps cids-sensor command. To remove the Intrusion Detection System (IDS) sensors for the Wireless
Protection System (WPS), use the no form of the command.
wireless wps cids-sensor index [ip-address ip-addr username username password password_type password]
no wireless wps cids-sensor index
Syntax Description
Specifies the IDS sensor internal index.
index
Specifies the IDS sensor IP address, IDS sensor username,
password type and IDS sensor password.
password type and IDS sensor password.
ip-address ip-addr username username
password password_type password
password password_type password
Command Default
Disabled.
Command Modes
config
Command History
Modification
Release
This command was introduced.
Cisco IOS XE 3.2SE
Usage Guidelines
None
Examples
This example shows how to configure the intrusion detection system with the IDS index, IDS sensor IP address,
IDS username and IDS password.
IDS username and IDS password.
Controller#
configure terminal
Enter configuration commands, one per line.
End with CNTL/Z.
Controller(config)#
wireless wps cids-sensor 1 10.0.0.51 Sensor_user0doc1 passowrd01
Consolidated Platform Command Reference, Cisco IOS XE Release 3SE (Cisco WLC 5700 Series)
450
OL-29471-01
wireless wps cids-sensor