Технические ссылки для Cisco Cisco 5760 Wireless LAN Controller
show pagp
To display Port Aggregation Protocol (PAgP) channel-group information, use the show pagp command in
EXEC mode.
EXEC mode.
show pagp [channel-group-number] {counters| dual-active| internal| neighbor}
Syntax Description
(Optional) Number of the channel group. The range is 1 to 128.
channel-group-number
Displays traffic information.
counters
Displays the dual-active status.
dual-active
Displays internal information.
internal
Displays neighbor information.
neighbor
Command Default
None
Command Modes
User EXEC
Privileged EXEC
Command History
Modification
Release
This command was introduced.
Cisco IOS XE 3.2SE
Usage Guidelines
You can enter any show pagp command to display the active channel-group information. To display the
nonactive information, enter the show pagp command with a channel-group number.
nonactive information, enter the show pagp command with a channel-group number.
Examples
This is an example of output from the show pagp 1 counters command:
Controller>
show pagp 1 counters
Information
Flush
Port
Sent
Recv
Sent
Recv
----------------------------------------
Channel group: 1
Channel group: 1
Gi1/0/1
45
42
0
0
Gi1/0/2
45
41
0
0
This is an example of output from the show pagp dual-active command:
Controller>
show pagp dual-active
PAgP dual-active detection enabled: Yes
PAgP dual-active version: 1.1
PAgP dual-active version: 1.1
Consolidated Platform Command Reference, Cisco IOS XE Release 3SE (Cisco WLC 5700 Series)
OL-29471-01
497
show pagp