Технические ссылки для Cisco Cisco 5760 Wireless LAN Controller
show platform etherchannel
To display platform-dependent EtherChannel information, use the show platform etherchannel command
in privileged EXEC mode.
in privileged EXEC mode.
show platform etherchannel channel-group-number {group-mask| load-balance mac src-mac dst-mac [ip
src-ip dst-ip [port src-port dst-port]]} [switch switch-number]
src-ip dst-ip [port src-port dst-port]]} [switch switch-number]
Syntax Description
Channel group number. The range is 1 to 128.
channel-group-number
Displays EtherChannel group mask.
group-mask
Tests EtherChannel load-balance hash algorithm.
load-balance
Specifies the source and destination MAC addresses.
mac src-mac dst-mac
(Optional) Specifies the source and destination IP addresses.
ip src-ip dst-ip
(Optional) Specifies the source and destination layer port numbers.
port src-port dst-port
(Optional) Specifies the stack member.
switch switch-number
Command Default
None
Command Modes
Privileged EXEC
Command History
Modification
Release
This command was introduced.
Cisco IOS XE 3.2SE
Usage Guidelines
Use this command only when you are working directly with a technical support representative while
troubleshooting a problem. Do not use this command unless a technical support representative asks you to do
so.
troubleshooting a problem. Do not use this command unless a technical support representative asks you to do
so.
Consolidated Platform Command Reference, Cisco IOS XE Release 3SE (Cisco WLC 5700 Series)
OL-29471-01
499
show platform etherchannel