Технические ссылки для Cisco Cisco 5760 Wireless LAN Controller
show platform pm
To display platform-dependent port manager information, use the show platform pm command in privileged
EXEC mode.
EXEC mode.
show platform pm {etherchannel channel-group-number group-mask| interface-numbers| port-data
interface-id| port-state| spi-info| spi-req-q}
interface-id| port-state| spi-info| spi-req-q}
Syntax Description
Displays the etherchannel group-mask table for the specified
channel-group. The channel-group range is 1 to 128.
channel-group. The channel-group range is 1 to 128.
etherchannel channel-group-number
group-mask
group-mask
Displays interface numbers information.
interface-numbers
Displays port data information for the specified interface.
port-data interface-id
Displays port state information.
port-state
Displays stateful packet inspection (SPI) information.
spi-info
Displays stateful packet inspection (SPI) maximum wait time for
acknowledgment.
acknowledgment.
spi-req-q
Command Default
None
Command Modes
Privileged EXEC
Command History
Modification
Release
This command was introduced.
Cisco IOS XE 3.2SE
Usage Guidelines
Use this command only when you are working directly with your technical support representative while
troubleshooting a problem. Do not use this command unless your technical support representative asks you
to do so.
troubleshooting a problem. Do not use this command unless your technical support representative asks you
to do so.
Consolidated Platform Command Reference, Cisco IOS XE Release 3SE (Cisco WLC 5700 Series)
500
OL-29471-01
show platform pm