Технические ссылки для Cisco Cisco 5760 Wireless LAN Controller
broadcast-ssid
To enable a Service Set Identifier (SSID) on a WLAN, use the broadcast-ssid command. To disable
broadcasting of SSID, use the no form of this command.
broadcasting of SSID, use the no form of this command.
broadcast-ssid
no broadcast-ssid
Syntax Description
This command has no keywords or arguments.
Command Default
The SSIDs of WLANs are broadcasted by default.
Command Modes
wlan
Command History
Modification
Release
This command was introduced.
Cisco IOS XE 3.2SE
Usage Guidelines
You must disable the WLAN before using this command.
Examples
This example shows how to enable a broadcast SSID on a WLAN.
Controller#
configure terminal
Enter configuration commands, one per line.
End with CNTL/Z.
Controller(config)#
wlan wlan1
Controller(config-wlan)#
broadcast-ssid
Controller(config-wlan)#
end
This example shows how to disable a broadcast SSID on a WLAN:
Controller#
configure terminal
Enter configuration commands, one per line.
End with CNTL/Z.
Controller(config)#
wlan wlan1
Controller(config-wlan)#
no broadcast-ssid
Controller(config-wlan)#
end
Consolidated Platform Command Reference, Cisco IOS XE Release 3SE (Cisco WLC 5700 Series)
526
OL-29471-01
broadcast-ssid