Технические ссылки для Cisco Cisco 5760 Wireless LAN Controller
channel-scan defer-priority
To configure the device to defer priority markings for packets that can defer off-channel scanning, use the
channel-scan defer-priority command. To disable the device to defer priority markings for packets that can
defer off-channel scanning, use the no form of this command.
channel-scan defer-priority command. To disable the device to defer priority markings for packets that can
defer off-channel scanning, use the no form of this command.
channel-scan defer-priority priority
no channel-scan defer-priority priority
Syntax Description
Channel priority value. The range is 0 to 7. The default is 3.
priority
Command Default
Channel scan defer is enabled.
Command Modes
wlan
Command History
Modification
Release
This command was introduced.
Cisco IOS XE 3.2SE
Examples
This example shows how to enable channel scan defer priority on a WLAN and set it to a priority value 4:
Controller#
configure terminal
Enter configuration commands, one per line.
End with CNTL/Z.
Controller(config)#
wlan wlan1
Controller(config-wlan)#
channel-scan defer-priority 4
Controller(config-wlan)#
end
This example shows how to disable channel scan defer priority on a WLAN:
Controller#
configure terminal
Enter configuration commands, one per line.
End with CNTL/Z.
Controller(config)#
wlan wlan1
Controller(config-wlan)#
no channel-scan defer-priority 4
Controller(config-wlan)#
end
Consolidated Platform Command Reference, Cisco IOS XE Release 3SE (Cisco WLC 5700 Series)
528
OL-29471-01
channel-scan defer-priority