Технические ссылки для Cisco Cisco 4404 Wireless LAN Controller

Deployment Guide for Cisco Guest Access Using the Cisco Wireless LAN Controller, Release 4.1

OL-13691-01

Web Authentication Process

Rebooting the Wireless LAN Controller

To commit the web authentication changes entered in the previous steps, you must reboot the controller.

To reboot the controller, follow these steps:

Step 1

Choose Commands from the navigation bar at the top of the page.

Step 2

Choose Reboot and then click Reboot.

Step 3

If there are any unsaved changes in your configuration, click Save and Reboot.

Web Authentication Using an External RADIUS Server

We can configure the wireless LAN used for guest traffic to authenticate the user from an external
RADIUS server. In this example it is 10.1.1.12.

To enable an external RADIUS server to authenticate traffic using the GUI, follow these steps:

Step 1

Choose WLANs > Edit (see

Figure 25

WLANs > Edit Page

Step 2

Select the appropriate IP address from the Radius Servers drop-down menu.

Note

The IP address for the RADIUS server is entered during initial setup of the controller using the
configuration wizard.