Технические ссылки для Cisco Cisco 4404 Wireless LAN Controller
3
Deployment Guide for Cisco Guest Access Using the Cisco Wireless LAN Controller, Release 4.1
OL-13691-01
Configuring Guest Access on the Cisco Wireless LAN Controller
•
Access Control – To identify any user or device that logs onto the network for assignment to
appropriate groups by employing an authentication process.
appropriate groups by employing an authentication process.
•
Guest User Credential Management - To support creation of temporary credentials for a guest by an
authorized user. This function may reside within an access control platform or a component of AAA
or other management system.
authorized user. This function may reside within an access control platform or a component of AAA
or other management system.
Initial Configuration
shows a basic guest access application using the Cisco wireless LAN controller. The
configuration shown is applicable for Cisco 2000, 2100, and 4400 series wireless LAN controllers.
The controller in the remote office is connected to a WAN infrastructure.
•
All the interfaces on the controller are mapped to physical port 1, and two wireless LANs are
configured:
configured:
–
one for a guest user (SSID – guest) and
–
one for EAP authentication (SSID – secure).
•
Dynamic VLAN interfaces are created for the guest SSID (VLAN 60) and the secure EAP SSID
(VLAN 30).
(VLAN 30).
•
The management and access point (AP) manager interfaces are configured to use VLAN 50.
•
All network services (AAA, DHCP, and DNS) are configured on VLAN 1.
•
All access points will be connected to VLAN 50.