Примечания к выпуску для Cisco Cisco 4402 Wireless LAN Controller
![Cisco](https://files.manualsbrain.com/attachments/7380d0050044647c30f5c24bbbf5d0c0b6d9bb84/common/fit/150/50/faa183d287233c52228cfea3dbc2a127fe780f60564fcb0955d9c3d1cd23/brand_logo.png)
7/27/05
Issues Corrected in this Release
OL-7431-02
•
15550 - Removed OEM license feature from the tree.
•
15554 - Corrected broken 3.0 build for 2000 Series.
•
15555 - Corrected 4400 Series second AP-manager interface so it now responds to ARPs from
APs.
APs.
•
15556 - Corrected crash when using outdoor AP adj_bestneighbors.
•
15563 - Corrected a spelling mistake on the commands page.
•
15570 - NPU now handles more than 300 SCBs.
•
15571 - Port redundancy in 4400 Series is now supported through Web User and SNMP
interfaces.
interfaces.
•
15582 - WPA-PSK clients no longer remain in the key exchange state when connected to
AP1030.
AP1030.
•
15583 - Corrected an incorrect candidate list.
•
15587 - Corrected the disable key update.
•
15589 - Added a warning when a user changes the country code setting.
•
15603 - Can now configure the maximum number of supported ACLs using the Web User
Interface.
Interface.
•
CSCsa17730 - CSMDMv1.0:VS>Add:ALL can now be used instead of blank for VLAN.
•
CSCsa88363 - WARP debugs now indicate why re-key fails.
•
CSCsa88417 - Assignment of auto-anchor to WLAN is no longer restricted to local mobility
group.
group.
•
CSCsa88516 - Link redundancy now resumes on secondary port after 4400 Series reset.
•
CSCsa89314 - Updated the copyright statement.
•
CSCsa90059 - Autocontainment feature is disabled in Web User and CLI interfaces.
•
CSCsa90353 - Client ARP entry programmed with correct type.
•
CSCsa90413 - Output from SSH no longer goes to serial console.
•
CSCsa90463 - Now preventing man-in-the-middle attacks on management telnet session.
•
CSCsa91156 - Add bridging to the AP Mode selections.
•
CSCsa91563 - Corrected errors in the CLI that were caused by printf format argument
checking.
checking.
•
CSCsa91982 - Controller no longer crashes when adding third party WLANs.
•
CSCsa92507 - Bridging APs now use the AP1030 SKU.
•
CSCsa92520 - 4400 Series no longer receives multiple number ping during link redundancy.
•
CSCsa92601 - Corrected confusing bridging detail information on Web User interface.
•
CSCsa93308 - Bridging AP no longer crashes when overloaded with 12MB.
•
CSCsa93710 - Corrected failure generated in response to EAP logoff.
•
CSCsa93993 - Bridging: Poletop AP retains the old BHrate when changed to new value.
•
CSCsa94413 - Corrected an intermittent web auth failure.
•
CSCsa94696 - Bridging AP now enables allow-old-bridge-aps when upgraded.