Примечания к выпуску для Cisco Cisco 4402 Wireless LAN Controller
7/27/05
Issues Corrected in this Release
OL-7431-02
•
CSCsb01406 - Clients on 4402 can now pass traffic.
•
CSCsb01416 - Corrected an SNMP RADIUS parameter exception when changing to AP MAC
address on 2000 Series.
address on 2000 Series.
•
CSCsb01436 - Updated selected 4400 Series error message creation.
•
CSCsb01889 - Controller no longer loses reachability after deleting a dynamic interface.
•
CSCsb02011 - Corrected 4400 Series message 'Interface Table Entry set' error on console.
•
CSCsb02092 - Clients are now able to reach default gateway.
•
CSCsb02213 - Corrected Controller crash with reaper reset.
•
CSCsb02472 - After 4400 Series port failover enabled WLANs remain enabled.
•
CSCsb03214 - 1000 series APs now only join the 4400 Series through the active port.
•
CSCsb03336 - Corrected a 2000 Series crash in apfReceiveTask during same-subnet handoff.
•
CSCsb03415 - Same-Subnet 2000 Series handoff now works on web-auth WLAN.
•
CSCsb03419 - Corrected an occasional 4000 series switch crash.
•
CSCsb03509 - 2000 Series no longer runs out of buffer.
•
CSCsb03630 - Corrected 4400 Series low level ethernet drivers.
•
CSCsb03669 - Eliminated 4400 Series broadcast storm.
•
CSCsb03900 - Created more space for 2000 Series image.
•
CSCsb04164 - 4400 series no longer passes external web auth traffic without authentication.
•
CSCsb04344 - 4400 series can now send interference profile trap error messages.
•
CSCsb04816 - Can now create an ACL rule for a source/destination host in 2000 Series.
•
CSCsb05047 - Corrected a Controller crash after upgrading image.
•
CSCsb05123 - Wireless clients are now able to pass data beyond 4400 series using link
redundancy.
redundancy.
•
CSCsb05779 - Bridging: 2000 Series CLI now gives complete neighbor information.
•
CSCsb05954 - Corrected a 4400 series system crash.
•
CSCsb06447 - 2000 Series now gives correct IDS signature pattern in the standard sig file.
•
CSCsb06484 - 1000 series no longer crashes on reboot.
•
CSCsb06493 - RADIUS Servers now work with 4400 series after upgrade.
•
CSCsb06576 - 4400 series NPU is now forwarding data traffic with the correct source and port
MAC.
MAC.
•
CSCsb07161 - Client Exclusion noW works with 4400 series auth failures.
•
CSCsb07297 - 4400 series now uses Cisco as the default build.
•
CSCsb07461 - Retained multiple ap-manager interface configuration capability on 4400 series
only.
only.
•
CSCsb08086 - 4400 series management interface is now reachable.
•
CSCsb08660 - Corrected 1000 series AP crashes after downloading new image from 4400
series.
series.
•
CSCsb08774 - 4000 Series NPU now correctly generates idle-timeout events for AP1030 clients.