Руководство По Установке для Cisco Cisco TelePresence MX700
D14639.06 Video Systems Getting Started Guide (TC5.1) | 2012 FEBRUARY | © 2011-2012 Cisco Systems, Inc. All rights reserved.
www.cisco.com
13
GettinG started Guide
touch controller
Provisioning set-up
(when using a provisioning system)
Configure Your TelePresence Unit
Next
Cancel
Select infrastructure:
Cisco VCS
Cisco TelePresence Callway
Cisco UCM
Configure Your TelePresence Unit
Register
Cancel
Infrastructure
Cisco UCM
External Manager
Back
Configure Your TelePresence Unit
Register
Cancel
Infrastructure Cisco VCS
Username
Password
Domain
External Manager
Back
Register
Cancel
Upon ordering the Cisco TelePresence Callway
service, you have received a Video number and an
Activation code.Please send an e-mail to support@
callway.com if you don't have a video phone number
and an activation code.
service, you have received a Video number and an
Activation code.Please send an e-mail to support@
callway.com if you don't have a video phone number
and an activation code.
Infrastructure
Cisco TelePresence Callway
Video number
Activation code
Configure Your TelePresence Unit
Back
3. Enter required parameters
Enter the parameters required for the chosen provisioning infrastructure (see illustrations below). Then tap
Register
to complete the procedure.
Cisco TelePresence Callway
Upon ordering the Cisco TelePresence Callway service, you
have received a
Video number
and an
Activation code
.
Please send an e-mail to
support@callway.com
if you don't
have a video phone number and an activation code.
Cisco UCM
Contact your UCM provider to get the IP address or DNS
name of the Cisco UCM (
External Manager
)
1)
.
You can find more details about setting up Cisco UCM
provisioning in the Administering TC endpoints on CUCM
guide.
Cisco VCS (for EX and MX Series only)
Contact your VCS provider to get the IP address or DNS
name of the Cisco VCS (
External Manager
), the SIP
Domain
,
and, if required, the
Username
/
Password
for authenticating
the video system with the provisioning server.
Have a look at the
appendix for more information about VCS
provisioning.
1. Start the Provisioning Wizard
Tap
More > Settings > Administrator Settings > Network
Settings > Provisioning
and then
Start
.
NoTE:
When connecting an EX or MX system for the first
time, the Provisioning Wizard will start automatically.
2. Select provisioning infrastructure
Select one of the following supported provisioning systems:
• Cisco TelePresence Callway
• Cisco UCM (Unified Communications Manager)
• Cisco VCS (Video Communication Server)
• Cisco UCM (Unified Communications Manager)
• Cisco VCS (Video Communication Server)
Tap
Next
to proceed.
Back to task overview
1)
The DHCP server can be set up to provide the External Manager
address automatically (DHCP Option 150). Any input in the input
field overrides the setting provided by DHCP.
field overrides the setting provided by DHCP.
User interfaces
Introduction
Configuration
Table of contents
Appendices
Configuration