Руководство По Установке для Cisco Cisco Aironet 3800i Access Point
18
9
Mounting and Grounding the Access Point
Cisco Aironet 3800 series access points can be mounted in several configurations – on a suspended
ceiling, on a hard ceiling or wall, on an electrical or network box, and above a suspended ceiling.
ceiling, on a hard ceiling or wall, on an electrical or network box, and above a suspended ceiling.
Go to the following URL for access point mounting instructions:
The standard mounting hardware supported by the AP is listed in
.
When mounting the AP in areas where there is a possibility of the AP being knocked off the mounting
bracket, use the lock hasp on the back of the AP (see
bracket, use the lock hasp on the back of the AP (see
) to lock it to the bracket. Also, see
to know how the power cable is to be routed.
Table 1
Brackets and Clips for Mounting the AP
Part Number
Description
Brackets
1
1. Mount the AP using no less than four screw holes on a bracket.
AIR-AP-BRACKET-1
Low-profile bracket
(This is the default option)
AIR-AP-BRACKET-2
Universal bracket
Clips
AIR-AP-T-RAIL-R
Ceiling Grid Clip (Recessed mounting)
(This is the default option)
AIR-AP-T-RAIL-F
Ceiling Grid Clip (Flush mounting)
AIR-CHNL-ADAPTER
Optional adapter for channel-rail ceiling grid profile.