Руководство По Устранению Ошибки для Cisco Cisco Packet Data Gateway (PDG)
Global Configuration Mode Commands
▀ threshold poll dcca-bad-answers
▄ Cisco ASR 5000 Series Command Line Interface Reference
OL-22948-01
threshold poll dcca-bad-answers
This command configures the polling interval for DCCA Bad Answers threshold—invalid or bad response to the system
from the Diameter server.
from the Diameter server.
Product
ECS
Privilege
Security Administrator, Administrator
Syntax
Configures the default setting.
Default: 900 seconds
Default: 900 seconds
Specifies the poling interval for DCCA Bad Answers threshold, in seconds.
must be an integer value from 60 through 60000.
Usage
This command configures the poling interval for DCCA Bad Answers threshold.
Important:
All configured polling intervals are rounded up to the closest multiple of 30. For example, if a polling
interval is configured for 130 seconds, the system uses a polling interval of 150 seconds.
Refer to the
and other threshold commands for additional information on the
system‘s support for thresholding in this chapter.
Example
The following command configures the polling interval to 600 seconds for invalid or bad response threshold to the
system from Diameter server:
The following command configures the polling interval to 600 seconds for invalid or bad response threshold to the
system from Diameter server: