Руководство По Устранению Ошибки для Cisco Cisco Packet Data Gateway (PDG)
Service Configuration Procedures
▀ Session Continuity Support
▄ Cisco ASR 5000 Series Access Service Network Gateway Administration Guide
OL-22953-01
Step 5
To configure the FA service for controlling the negotiation and sending of the I-bit in revocation messages, enter:
By default it will not send I-bit in revocation message.
Step 6
Return to the Exec mode by entering the following command:
Step 7
Save your configuration as described in Saving Your Configuration.
Common HA Service Configuration
WiMAX-3GPP2 interworking must be enabled. Use the
command.
The
must be set to required.
The
command must be set to allow-noauth.
Revocation must be enabled.
These instructions assume that you are at the root prompt for the Exec mode:
Step 1
Enter the configuration mode by entering:
The following prompt appears:
Step 2
Enter context configuration mode by entering:
context_name is the name of the system context designated for HA service configuration. The name must be from 1 to
63 alpha and/or numeric characters and is case sensitive.
63 alpha and/or numeric characters and is case sensitive.