Руководство По Устранению Ошибки для Cisco Cisco Packet Data Gateway (PDG)
QoS Management
▀ Configuring Network Controlled QoS (NCQoS)
▄ Cisco ASR 5000 Series Enhanced Feature Configuration Guide
OL-22983-01
Configuring Network Controlled QoS (NCQoS)
To configure NCQoS:
Step 1
Configure packet filter parameters as described in the
Step 2
Configure charging rules and actions as described in the
Step 3
Configure APN template and enable bearer control mode for NCQoS as described in the
section.
Step 4
Save your configuration as described in the Verifying and Saving Your Configuration chapter.
Step 5
Important:
Commands used in the configuration examples in this section provide base functionality to the extent
that the most common or likely commands and/or keyword options are presented. In many cases, other optional
commands and/or keyword options are available. Refer to the Command Line Interface Reference for complete
information regarding all commands.
commands and/or keyword options are available. Refer to the Command Line Interface Reference for complete
information regarding all commands.
Configuring Packet Filter for NCQoS
Use the following example to configure packet filter parameters for NCQoS support: