Руководство По Устранению Ошибки для Cisco Cisco Packet Data Gateway (PDG)
NAT Configuration
▀ Configuring NAT
▄ Cisco ASR 5000 Series Network Address Translation Administration Guide
OL-22992-01
Notes:
Create a separate routing ruledef for each protocol.
Configuring Routing Ruledefs in Rulebase
To configure the routing ruledefs in the rulebase, use the following configuration:
Notes:
Add each routing ruledef as a separate route priority.
If PPTP ALG is enabled, NAT is supported for GREv1 flows that are generated by PPTP.
For RTSP ALG processing, in the rulebase, the
command must be
configured.
For SIP ALG processing, the
option must be configured to ensure that packets matching the routing
rule will be routed to the SIP ALG for processing and not to the ECS SIP analyzer.
Enabling NAT ALG
To enable NAT ALGs, use the following configuration:
Notes: