Руководство По Устранению Ошибки для Cisco Cisco Packet Data Gateway (PDG)
NAT Configuration
Configuring NAT ▀
Cisco ASR 5000 Series Network Address Translation Administration Guide ▄
OL-22992-01
To specify that the default Firewall-and-NAT policy configured in the rulebase be used for subscribers, in the
Subscriber Configuration Mode, apply the following command:
Configuring the Default Firewall-and-NAT Policy
This is an optional configuration to specify a default Firewall-and-NAT policy to use if in the APN/subscriber
configurations the following command is configured:
configurations the following command is configured:
To create a rulebase and configure a default Firewall-and-NAT policy in it, use the following configuration:
Configuring NAT Application Level Gateways/Dynamic Pinholes
This section describes how to configure routing rules to open up dynamic pinholes for Application Level Gateways
(ALG) functionality.
(ALG) functionality.
The following topics are covered in this section:
Creating Routing Ruledefs
To configure ECS routing rules for FTP and RTSP protocols, use the following configuration: