Примечания к выпуску для Cisco Cisco AP541N Wireless Access Point

Cisco Small Business AP541N Access Point Release Notes for Versions 1.7.2 through 2.0.4

7

CSCtg28357—Error Message on MIB walk: Must Define the 
apRadioStationIsolation Instance in CISCO-WLAN-ACCESS-POINT-MIB 

The following MIBs are added in the MIB repository net-SNMP— 
(C:\usr\share\snmp\mibs):

CISCO-WLAN-ACCESS-POINT-MIB.txt
CISCO-WLAN-ACCESS-POINT-REF-MIB-A-SKU.txt
CISCO-WLAN-ACCESS-POINT-REF-MIB-E-SKU.txt
CISCO-WLAN-ACCESS-POINT-REF-MIB-N-SKU.txt

The MIB names are C:\usr\etc\snmp (snmp.conf). For example:

mibdirs C:/usr/share/snmp/mibs
persistentDir C:/usr/snmp/persist
tempFilePattern C:/usr/temp/snmpdXXXXXX
mibs +OLD-CISCO-CHASSIS-MIB
mibs +CISCO-WLAN-ACCESS-POINT-REF-MIB
mibs +CISCO-WLAN-ACCESS-POINT-REF-MIB
mibs +CISCO-WLAN-ACCESS-POINT-REF-MIB
mibs +CISCO-WLAN-ACCESS-POINT-MIB

If there is anything wrong with the added MIBs, running a MIB walk at a command 
prompt generates an error message. For example:

C:\Documents and Settings\tdobrovo\Desktop>snmpwalk -v 2c -c public 172.25.144.155 
sysObjectID

Undefined OBJECT (apRadioStationIsolation): At line 3670 in C:/usr/share/
snmp/mibs/CISCO-WLAN-ACCESS-POINT-MIB.txt
SNMPv2-MIB::sysObjectID.0 = OID: CISCO-SMI::ciscoProducts.1135.1.28

To avoid this error, define apRadioStationIsolation in 
CISCO-WLAN-ACCESS-POINT-MIB.

CSCtg28364—Standalone AP EDCA: Misreported Values for the TxOP Burst 
Queue Attributes 

The EDCA Max Burst parameter should be in units of 32us periods, but it is not 
converted correctly by the access point. 

CSCtg28367—Cisco AP541N MIB sysObjectId Does Not Return the Correct 
Number

The wrong OID is returned by the object in the access point code.

CSCtg28374—CDP Show Neighbor Displays Only Four CDP Entries

When the 

cdh show neighbor command is executed on console, it displays 

only four neighbor entries.