для Cisco Cisco Packet Data Gateway (PDG)
P-GW Changes in Release 17
P-GW Enhancements for 17.4 ▀
Release Change Reference, StarOS Release 17 ▄
357
no-bitrate-change: Configures UBR suppression when there is no change in bit rates after bps to kbps round-
off. By default, this keyword is disabled.
no: Disables UBR suppression. UBR is triggered, even if the Gx and GTP bit rates in kbps are the same after
round-off.
Performance Indicator Changes
show configuration
The following field has been added to the output of this command under the P-GW service:
egtp suppress-ubr no-bitrate-change
show configuration verbose
The following field has been added to the output of this command under the P-GW service:
no egtp suppress-ubr no-bitrate-change
show pgw-service name <pgw-service-name >
The following field has been added to the output of this command under the P-GW service:
EGTP Suppress Update Bearer Request (no bitrate change): Enabled / Disabled
CSCus03709 - Command <b>clear subs</b> with grep does not prompt for
confirm
Feature Changes
Grep Option Removed from
clear subscriber
Command
Previous Behavior: Earlier, the command
clear subscriber
asked for a confirmation before clearing the
subscribers when
no autoconfirm
was set. Also, when
clear subscriber
command was given in conjunction
with a
|
, the command cleared the subscribers without asking for confirmation, even when
no autoconfirm
was set.
As a result, the subscribers were cleared without confirmation.
New Behavior: The
|
option has been removed and is no longer available. The command
clear subscriber
now
always ask for a confirmation message when
no autoconfirm
is set.
Command Changes
clear subscriber
This command has been modified to remove the
|
option. The command now always prompts for a confirmation when
no autoconfirm
is set.