Примечания к выпуску для Cisco Cisco Aironet 350 Wireless LAN Client Adapter
8
Release Notes for Cisco Aironet 802.11a/b/g Client Adapters (CB21AG and PI21AG) Install Wizard 3.6
OL-13094-01
Installing the Client Adapter Software
Installing the Client Adapter Software
This section describes how to install Cisco Aironet CB21AG or PI21AG client adapter driver and
utilities from a single executable file named WinClient-802.11a-b-g-Ins-Wizard-vx.exe, where x
represents the release number. Follow these steps to install these client adapter software components on
a computer running Windows 2000 or XP.
utilities from a single executable file named WinClient-802.11a-b-g-Ins-Wizard-vx.exe, where x
represents the release number. Follow these steps to install these client adapter software components on
a computer running Windows 2000 or XP.
Caution
Cisco Aironet CB21AG and PI21AG client adapter software is incompatible with other Cisco Aironet
client adapter software. The Aironet Desktop Utility (ADU) must be used with CB21AG and PI21AG
cards, and the Aironet Client Utility (ACU) must be used with all other Cisco Aironet client adapters.
client adapter software. The Aironet Desktop Utility (ADU) must be used with CB21AG and PI21AG
cards, and the Aironet Client Utility (ACU) must be used with all other Cisco Aironet client adapters.
Caution
Do not eject your client adapter at any time during the installation process, including during the reboot.
Note
This procedure is meant to be used the first time the Cisco Aironet CB21AG or PI21AG client adapter
software is installed on your computer. If this software is already installed on your computer, follow the
instructions in Chapter 9 to upgrade the client adapter software.
software is installed on your computer. If this software is already installed on your computer, follow the
instructions in Chapter 9 to upgrade the client adapter software.
Note
Only one CB21AG or PI21AG client adapter can be installed and used at a time. The software does not
support the use of multiple CB21AG or PI21AG cards.
support the use of multiple CB21AG or PI21AG cards.
Step 1
Make sure the client adapter is inserted into your computer.
Step 2
Make sure that you have a Cisco Connection Online (CCO) username and password.
Step 3
If you do not have a CCO username and password, go to Cisco’s main page (
) and
click Register (top). Then, follow the instructions to create a CCO username and password.
Step 4
Browse to the following location:
Step 5
Click Wireless Software.
Step 6
Click Wireless LAN Access.
Step 7
Click Cisco Wireless LAN Client Adapters.
Step 8
Click Cisco Aironet Wireless LAN Client Adapters.
Step 9
Perform one of the following steps:
•
If you are using a PC-Cardbus card, click Cisco Aironet 802.11a/b/g CardBus Wireless LAN
Client Adapter (CB21AG).
Client Adapter (CB21AG).
•
If you are using a PCI card, click Cisco Aironet 802.11a/b/g PCI Wireless LAN Client Adapter
(PI21AG).
(PI21AG).
Step 10
When prompted, enter your CCO username and password, and click OK.
Step 11
Click Aironet Client Installation Wizard (Firmware, Driver, Utility).
Step 12
Click Windows 2000 or Windows XP.
Step 13
Click the link with the latest release number.