Примечания к выпуску для Cisco Cisco Aironet 350 Wireless LAN Client Adapter
7
Release Notes for Cisco Aironet 802.11a/b/g Client Adapters (CB21AG and PI21AG) Install Wizard 3.6
OL-13094-01
New and Changed Information
Auto Profile Selection Enables Scan of Wireless Modes in Auto-Selected
Profiles
Profiles
When you enable auto profile selection, the client adapter ignores the selected profile’s wireless mode
setting and scans the wireless modes specified by all the profiles in the auto profile selection list for an
available network. With this method, the client does not need to disassociate or to change the current
profile while looking for networks in other profiles.
setting and scans the wireless modes specified by all the profiles in the auto profile selection list for an
available network. With this method, the client does not need to disassociate or to change the current
profile while looking for networks in other profiles.
ASTU Exit Option
The Exit option on the Aironet System Tray Utility (ASTU) pop-up menu closes both ASTU and ADU.
Windows Wireless Network Connection Icon Shows Unavailable Connection
(Windows XP Only)
(Windows XP Only)
If your computer is running Windows XP and you configured your client adapter using ADU, the
Windows Wireless Network Connection icon in the Windows system tray may be marked with a red X
and show an unavailable connection even though a wireless connection exists. This condition is caused
by a conflict between ADU and Windows XP wireless network settings. Simply ignore the Windows icon
and use the ASTU icon to check the status of your client adapter’s wireless connection.
Windows Wireless Network Connection icon in the Windows system tray may be marked with a red X
and show an unavailable connection even though a wireless connection exists. This condition is caused
by a conflict between ADU and Windows XP wireless network settings. Simply ignore the Windows icon
and use the ASTU icon to check the status of your client adapter’s wireless connection.
Supporting Documentation
The Cisco Aironet 802.11a/b/g Wireless LAN Client Adapters (CB21AG and PI21AG) Installation and
Configuration Guide (OL-4211-06) pertains specifically to CB21AG and PI21AG client adapters. If you
are using a Cisco Aironet 340, 350, or CB20A client adapter, refer to the installation and configuration
guide for that client adapter and your computer’s operating system.
Configuration Guide (OL-4211-06) pertains specifically to CB21AG and PI21AG client adapters. If you
are using a Cisco Aironet 340, 350, or CB20A client adapter, refer to the installation and configuration
guide for that client adapter and your computer’s operating system.
New and Changed Information
Management Frame Protection
Release 3.6 supports Management Frame Protection (MFP) when available and enabled on the wireless
infrastructure. The CB21AG and PI21AG have MFP automatically enabled.
infrastructure. The CB21AG and PI21AG have MFP automatically enabled.
Installing or Upgrading Client Adapter Software
This section describes how to initially install or upgrade to CB21AG and PI21AG Install Wizard 3.6 on
a computer running Windows 2000 or XP. If the client adapter software is not installed on your computer,
follow the instructions in the
a computer running Windows 2000 or XP. If the client adapter software is not installed on your computer,
follow the instructions in the
section below. If you
are upgrading your client adapter software to release 3.6, follow the instructions in the
.