для Cisco Cisco Packet Data Gateway (PDG)
show card
▀
Statistics and Counters Reference, StarOS Release 16 ▄
3669
Field
Applicable
Card(s)
Card(s)
Description
Card LEDs
All (except as
indicated)
indicated)
Displays the state of the Run/Fail, Active and Redundancy light emitting
diodes (LEDs) on the front panels of each of the cards.
diodes (LEDs) on the front panels of each of the cards.
Run/Fail LED: Green is normal, Red or Off indicate a problem.
Active: Green indicates that the software is loaded or is being
loaded (blinking) on the card.
loaded (blinking) on the card.
Redundancy: Green indicates that the card is in standby mode.
NOTE: If the Run/Fail LED is either Red or Off, refer to ASR 5500 System
Administration Guide for information on troubleshooting the problem.
The following LEDs appear on the MIO/UMIO only:
Administration Guide for information on troubleshooting the problem.
The following LEDs appear on the MIO/UMIO only:
Master: Green indicates that the card is in Active mode.
Busy: Green indicates that the card is accessing the RAID solid
state drives on the FSCs.
state drives on the FSCs.
The following LEDs appear on the FSC only:
Drive 1 Activity and Drive 2 Activity: Indicate that the RAID
solid state drives are being accessed by the MIO/UMIO.
solid state drives are being accessed by the MIO/UMIO.
The following LEDs appear on the SSC only:
System Status: Red indicates the that there is a loss of service
somewhere in the system. For example, the system could not
locate a a valid software image at boot-up, or a high temperature
condition exists.
somewhere in the system. For example, the system could not
locate a a valid software image at boot-up, or a high temperature
condition exists.
System Service: Illuminates amber to indicate that the system has
experienced a hardware component failure.
experienced a hardware component failure.
Refer to the ASR 5500 Installation Guide for additional information.
CPU 0, CPU 1
MIO/UMIO,
DPC/UDPC
DPC/UDPC
Displays whether an Error ID Log or Boot Progress Log is present for the
CPU.
CPU.
show card info (QvPC-SI)
Table 233.
show card info (QvPC-SI)
Command Output Descriptions
Field
Applicable
Card(s)
Description
Slot Type
Virtual
Displays the acronym for the card type.
Card Type
Virtual
Indicates the type of card installed.