Примечания к выпуску для Cisco Cisco Aironet 350 Wireless LAN Client Adapter

The Exit option on the Aironet System Tray Utility (ASTU) pop-up menu closes both ASTU and ADU.

If your computer is running Windows XP and you configured your client adapter using ADU, the 
Windows Wireless Network Connection icon in the Windows system tray may be marked with a red X 
and show an unavailable connection even though a wireless connection exists. This condition is caused 
by a conflict between ADU and Windows XP’s wireless network settings. Simply ignore the Windows 
icon and use the ASTU icon to check the status of your client adapter’s wireless connection.

The Cisco Aironet 802.11a/b/g Wireless LAN Client Adapters (CB21AG and PI21AG) Installation and 
Configuration Guide (OL-4211-04) pertains specifically to CB21AG and PI21AG client adapters. If you 
are using a Cisco Aironet 340, 350, or CB20A client adapter, refer to the Installation and Configuration 
Guide for that client adapter and your computer’s operating system.

This section describes how to initially install or upgrade to CB21AG and PI21AG Install Wizard 2.6 on 
a computer running Windows 2000 or XP. If the client adapter software is not installed on your computer, 
follow the instructions in the 

 section below. If you are 

upgrading your client adapter software to release 2.6, follow the instructions in the 

.

Follow these steps to install CB21AG and PI21AG Install Wizard 2.6 on your computer.

Do not eject your client adapter at any time during the installation process, including during the reboot.

Only one wireless client adapter can be installed and used at a time. The software does not support the 
use of multiple cards.

Make sure the client adapter is inserted into your computer.

Use your computer’s web browser to access the following URL:

Click Wireless LAN Access.