Примечания к выпуску для Cisco Cisco Aironet 350 Wireless LAN Client Adapter

 To unload the driver, enter CSCPKT –u <int_number> (for example, CSCPKT –u 0x65). The 
<int_number> value must be the same value used when you installed the driver.

Load the MS-DOS IP stack.

The PC card can be installed in an ODI compliant MS-DOS environment such as Novell NetWare. 
Follow these steps to install the driver.

Power on your computer.

Extract the CSCODI.COM files to the directory containing the network files on your computer’s hard 
drive.

Copy the NET.CFG file, or merge the Aironet supplied NET.CFG file into your existing NET.CFG file 
in the network directory.

Modify the adapter’s system parameters by editing the NET.CFG file. The following parameters can be 
modified:

Link driver CSCODI

INFRASTRUCTURE = YES (If omitted, default is YES)

SSID = <your SSID>

CHANNEL = <channel> (only required in Ad Hoc Mode)

Run the batch files created by the NetWare installation disks, or manually load the driver from 
AUTOEXEC.BAT or the command line. This can be done by running LSL, followed by CSCODI, 
IPXODI, and NETX or VLM.

The following INI and CFG file lines might appear anywhere within a section. Only the sections 
containing these lines will be parsed:

AWCPKT.INI file can have a section header of [CSCPKT].

PROTOCOL.INI file can have any section header, but the section must contain the keyword and 
parameter, for example DRIVERNAME=CSCNDIS2.

NET.CFG file must have a section header of [Link Driver CSCODI].

The following general information is pertinent:

Multiple sections are supported.

Blank lines are supported.

Comments begin with semicolon and can appear anywhere on a line.

Keywords can be uppercase or lowercase and can be surrounded by white space if desired.