Руководство По Устранению Ошибки для Cisco Cisco Aironet 350 Wireless LAN Client Adapter
Installing Linux Drivers and Utilities for the Cisco
Aironet 340/350 Series Client Adapters
Aironet 340/350 Series Client Adapters
Document ID: 8127
You need a valid Cisco.com account in order to download Cisco Aironet
drivers, firmware, and utilities. If you do not have a Cisco.com account,
register for free at the Cisco.com Registration page.
drivers, firmware, and utilities. If you do not have a Cisco.com account,
register for free at the Cisco.com Registration page.
Contents
Introduction
Prerequisites
Requirements
Components Used
Conventions
Install the Hardware
Install a PC Card
Install a PCI Client Adapter
Install the Drivers and Utilities
Installation Notes
Install the Basic Drivers and Utilities
Install PCMCIA Drivers
Install PCI Drivers
Install on Red Hat 7.1
Set Utility Permissions
Configure the Network Parameters
Configure the Radio Link
Configure the IP Address
Finish the Installation
Related Information
Prerequisites
Requirements
Components Used
Conventions
Install the Hardware
Install a PC Card
Install a PCI Client Adapter
Install the Drivers and Utilities
Installation Notes
Install the Basic Drivers and Utilities
Install PCMCIA Drivers
Install PCI Drivers
Install on Red Hat 7.1
Set Utility Permissions
Configure the Network Parameters
Configure the Radio Link
Configure the IP Address
Finish the Installation
Related Information
Introduction
This document provides an expanded guide to the installation of the Linux drivers and utilities for the Cisco
Aironet 340 and 350 Series Client Adapters.
Aironet 340 and 350 Series Client Adapters.
Prerequisites
Requirements
You need these items in order to complete this installation:
A Cisco Aironet 340 or 350 series client adapter card
•
The Linux drivers and utilities, which can be found on the Cisco Aironet Series Wireless LAN
Adapters CD−ROM or download the driver from the Wireless Downloads Page at Wireless > Cisco
Aironet 350 Wireless LAN Client Adapter > Aironet Client Bundle (Firmware, Driver, Utility)
> Linux .
Adapters CD−ROM or download the driver from the Wireless Downloads Page at Wireless > Cisco
Aironet 350 Wireless LAN Client Adapter > Aironet Client Bundle (Firmware, Driver, Utility)
> Linux .
•
If you use a PCMCIA client adapter, Cisco recommends that you use card and socket services
pcmcia−cs−3.1.26 or later, available from SourceForge
pcmcia−cs−3.1.26 or later, available from SourceForge
.
•