Руководство По Устранению Ошибки для Cisco Cisco Aironet 350 Wireless LAN Client Adapter

Tilt the adapter to allow the antenna connector and LEDs to slip through the opening in the CPU back
panel. Press the client adapter into the empty slot until the connector is firmly seated.

 Caution: Do not force the adapter into the expansion slot. This can damage both the adapter

and the slot. If the adapter does not insert easily, remove the adapter and reinsert it.

5. 

Reinstall the screw on the back panel of the CPU and replace the computer cover.

6. 

Attach the 2−dBi antenna to the antenna connector of the adapter until it is finger−tight. Do not
overtighten. For optimal reception, position the antenna so it is straight up.

7. 

Boot up the computer.

8. 

You must be logged in as root or otherwise have superuser rights in order to perform the installation.

• 

Version 1.5.000 of Cisco's Linux driver currently supports versions 2.2.x and 2.4.x of the Linux
kernel. Type uname −a and press Enter to determine your kernel version. The name of your
computer and the Linux kernel version are displayed.

Example: Linux montecito 2.2.16−22 #1 Tue Aug 22 164906 EDT 2000 i686 unknown

In this example, montecito is the computer name, and 2.2.16−22 is the kernel version.

♦ 

• 

Complete these steps to install the Linux drivers.

If you have a Cisco Aironet Series Wireless LAN Adapters CD−ROM containing the drivers and
utilities, insert it into the CD−ROM drive of your computer and go to the Linux directory on the
CD−ROM.

If you are working with the driver downloaded from the Cisco Downloads, go to the directory to
which you saved the file. Unpack the archive by using the tar command. If you downloaded an
updated version of pcmcia−cs, unpack it also.

1. 

In a terminal window, type sh ./cwinstall and press Enter.

2.