Примечания к выпуску для Cisco Cisco Aironet 350 Wireless LAN Client Adapter

You must have a Cisco Aironet 340, 350, or 4800 series PC card, LM card, or PCI client adapter to install 
firmware version 4.25.30.

To take advantage of the new features introduced in client adapter firmware release 4.25.30, you must 
install Windows ACU version 5.02.005 or greater and Windows PCM/LMC/PCI card driver version 
8.2.3 or greater. To benefit from the latest security features, your access points must use firmware version 
11.10T or greater.

PC, LM, and PCI cards use different drivers and firmware than mini PCI cards.

Although firmware version 4.25.30 is compatible with Windows CE, Linux, and Mac OS, the latest 
client utilities for these operating systems (version 2.20 for Windows CE, version 1.6.7 for Linux, 
and version 2.1 for Mac OS) do not support the new features introduced in this firmware release.

In order to use Network-EAP authentication on your wireless network, your client devices and 
infrastructure devices (access points and bridges) must use the same 802.1X protocol draft. Client 
firmware release 4.25.30 supports draft 10 of the 802.1X protocol standard. Therefore, if client devices 
use this version of firmware, an access point or bridge to which they associate must also be configured 
to use draft 10. The table below lists firmware versions for Cisco Aironet products and the drafts with 
which they comply.

1.

The functionality in draft 10 is equivalent to the functionality in draft 11, the 
ratified draft of the 802.1X standard.

4.13

x

—

4.16

x

—

4.23

x

—

4.25 and later

—

x

8.58

x

—

8.61 and later

—

x

11.05 and earlier

x

—

11.06 and later

2

2.

The default draft setting in access point and bridge firmware version 11.06 
and later is draft 10.

x

x

11.06 and later

x

x