Примечания к выпуску для Cisco Cisco Aironet 350 Wireless LAN Client Adapter

If your clients and infrastructure devices do not have matching 802.1X protocol drafts, upgrade the 
firmware in these devices to versions with the same draft number. However, if your access points or 
bridges are using firmware version 11.06 or later, you can use their Authenticator Configuration page to 
select the draft of the 802.1X protocol that they should use. To set the draft for your access points or 
bridges, follow the instructions in the Release Notes for your device.

This section describes how to upgrade to PC-Cardbus card firmware release 5.01.02.

Currently the PC-Cardbus card is supported only with Windows 98, 2000, Me, and XP.

To determine the firmware version that your PC-Cardbus card is currently using, follow the steps below.

Open ACU on a computer running Windows 98, 2000, Me, or XP.

Click the Status icon or select Status from the Commands drop-down menu. The firmware version is 
displayed on the Status screen.

To upgrade your PC-Cardbus card’s firmware on a computer running Windows 98, 2000, Me, or XP, 
follow the steps below.

Perform one of the following:

If you are installing firmware from a bundled file on Cisco.com, follow the steps below:

Using Windows Explorer, find the folders that were extracted from the bundle and double-click 
the firmware folder (the one that doesn’t specify ACU or the Windows operating system).

Go to 

.

If you are installing firmware from an individual file on Cisco.com, follow the steps below:

Use the computer’s web browser to access the following URL:

Click the link for Cisco Aironet Wireless LAN Client Adapters.

Find the section for client adapter firmware.

Click the link that corresponds to your client adapter’s model number (CB20A).