Примечания к выпуску для Cisco Cisco Aironet 350 Wireless LAN Client Adapter

To install firmware version 5.01.02, you must have a Cisco Aironet 5-GHz 54-Mbps PC-Cardbus card 
(model number CB20A) and your computer must run Windows 98, 2000, Me, or XP.

Firmware release 5.01.02 must be used with Windows ACU version 5.03.009 or greater and Windows 
PC-Cardbus card driver version 3.4.19 or greater. To ensure compatibility of devices, your access points 
must use firmware version 11.56 or greater.

PC-Cardbus cards use different drivers and firmware than PC, LM, and PCI cards and mini PCI cards.

In order to use Network-EAP authentication on your wireless network, your client devices and 
infrastructure devices (access points and bridges) must use the same 802.1X protocol draft. For example, 
PC-Cardbus card firmware release 5.01.02 supports draft 10 of the 802.1X protocol standard. Therefore, 
if PC-Cardbus cards use this version of firmware, an access point or bridge to which they associate must 
also be configured to use draft 10. The table below lists firmware versions for Cisco Aironet products 
and the drafts with which they comply.

1.

The functionality in draft 10 is equivalent to the functionality in draft 11, the 
ratified draft of the 802.1X standard.

PC-Cardbus card (CB20A)

4.99 and later

—

x

Mini PCI card (MPI350)

4.95.08 and later

—

x

PCM34x/35x, LMC34x/35x, and PCI34x/35x

4.13 to 4.23

x

—

4.25 and later

—

x

AP34x/35x

11.05 and earlier

x

—

11.06 and later

2

2.

The default draft setting in access point and bridge firmware version 11.06 
and later is draft 10.

x

x

AP1200

11.40T and later

x

x

8.58

x

—

8.61 and later

—

x

11.06 and later

x

x