Примечания к выпуску для Cisco Cisco Aironet 350 Wireless LAN Client Adapter

Choose one of these options on which the proximity beeper will be based:

Perform one of the following to set the tone of the proximity beeper:

Uncheck the Invert Tone of Proximity Beeper check box if you want the beeper’s rate and pitch to 
increase in response to the option selected in 

. The beeps become more alarming as the client 

adapter moves closer to an access point, enabling you to identify areas of good coverage. This is the 
default setting.

Check the Invert Tone of Proximity Beeper check box if you want the beeper’s rate and pitch to 
decrease in response to the option selected in 

. The beeps become more alarming as the client 

adapter approaches areas of weaker coverage.

Click OK to save your changes.

Follow the instructions in the 

 section below to enable the proximity 

beeper.

Signal Strength

The beeper sounds as an access point’s signal becomes stronger.

This is the default value.

Noise Level/Signal Quality

The beeper sounds as the level of background radio frequency energy 
decreases or the signal quality of the most recently received packets 
improves.

Signal-to-Noise Ratio/
Overall Link Quality

The beeper sounds as the client adapter’s ability to communicate with 
an access point improves.

Link Speed

The beeper sounds as the transmit rate of data packets between the 
client adapter and an access point becomes faster.