Примечания к выпуску для Cisco Cisco Aironet 350 Wireless LAN Client Adapter

This section describes changes and additions to the documents listed in the “Related Documentation” 
section below.

Cisco Aironet PCI client adapters are supported for use with PowerMac G3 (Blue and White) and G4 
desktop computers.

The instructions in the Cisco Aironet Wireless LAN Adapters Hardware Installation Guide for installing 
the driver for MacOS 9.x apply to both PC cards and PCI client adapters. However, the following 
exceptions should be noted:

If you elect to do an easy install, the Macintosh installer will load the drivers for both PC cards and 
PCI client adapters. If you elect to do a custom install, you must decide whether to install the driver 
for PC cards or the driver for PCI client adapters.

On PowerMac G3 computers, the PCI client adapter is referred to as “Ethernet slot JXX.” On 
PowerMac G4 computers, the PCI client adapter is referred to as “Ethernet slot SLOT XX.”

To physically install a Cisco Aironet PCI client adapter in your PowerMac G3 or G4, follow the 
instructions for installing a PCI expansion card in the user guide that accompanied your computer. 
After the adapter is installed, follow the instructions in the Cisco Aironet Wireless LAN Adapters 
Hardware Installation Guide to install the driver.

You can access the Cisco Aironet Wireless LAN Adapters Hardware Installation Guide at the 
following URL: 
http://www.cisco.com/univercd/cc/td/doc/product/wireless/airo_350/350cards/pc350hig/index.htm

For more information about Cisco Aironet client adapters, refer to the following documents: